DIY ~ Ford Transit Connect XLT Van [rollout kitchen finishings–potable water storage–now filled…], 09/10

…with water, just in case, for Hurricane Florence

This 10-foot 5/8″ hose will eventually be connected to the mobile kitchen that I will place on the roll-out shelf. In the meantime [for this storm] I have water stored in case I need it.

Advertisements

DIY ~ Micro-Lite Cargo-Go Lite Xtreme Trailer [Pole lights {Steampunk} ], 08/25

Now, with a switch/dimmer for each lamp

Initial article

 

DIY ~ Micro-Lite Cargo-Go Lite Xtreme Trailer [Air Cooler System–Ready for Covers], 08/19

Today’s trailer tasks are finished


I have put the insulated 10-gallon cooler back on its base and shorten the wiring. It is ready for its cover. I plan to use a bamboo window blind, pictured on the left and registers like the one pictured here. Please stay tuned…

Related articles

DIY ~ Micro-Lite Cargo-Go Lite Xtreme Trailer [Air Cooler–Heat Exchanger & More], 08/19

Closer to putting on a skin/veneer and enclosing the cooler–probably wood for both

IMG_1824I built a frame for the heat exchanger that has more insulation on the sides and a mounting board for the temperature gauges. The register is temporary–just to have a correct sized opening. I hope to use a thin, decorative wood–maybe ¼-inch. The wood top in the photo is also temporary.

IMG_1823I have insulated the 10-gallon cooler and have to put it back on its base, then shorten the wiring. I will cover the insulated cooler. I am not sure with what yet–maybe wood slats to match the trailer’s front panel.

Note, the portion of the exposed return tubing also has to be insulated.

Stay tuned…

Related articles

 

DIY ~ Micro-Lite Cargo-Go Lite Xtreme Trailer [Air Cooler–Heat Exchanger Insulated & Taped], 08/10

This should help the ice last longer…

Heat ExchangerNext, I need to insulate the return water tube and the cooler. Then, finish both. I will also insulate the wood box that I build for the heat exchanger. Stay tuned…

DIY ~ Micro-Lite Cargo-Go Lite Xtreme Trailer [Air Cooler–New Fans & Enclosed], 08/09

Fans replaced and heat exchanger enclosed

 

Next: tape sides/corners. insulate, build a wood enclosure, with decorative registers, insulate and enclose the bottom. All that will take a while–probably will not finish until sometime in September.

 

DIY ~ Micro-Lite Cargo-Go Lite Xtreme Trailer [Air Cooler], 08/08

I am 8 days into this project, saving holes in the trailer walls; and, I hope, comfortable air.

The pictures are chronologic. I have several tweaks to reduce the warming effect on the chilled water by the heat exchanger. After all, to the ice, it is a heater. More soon…